0
<-- nev left start -->

Pharmaceutical Clean Room

Pharmaceutical Clean Room
Pharmaceutical Clean Room
Price And Quantity
  • 10,000
  • Square Meter/Square Meters
  • 2000/ square meter ( DEPEND ON THICKNESS) INR
Product Specifications
  • Powder Coated Steel Sheet
  • As Per Specific Requirement
  • Galvanized steel
  • HEPA Filter, Mini Pleat HEPA Filter, Pre Filter, Fine Filter
  • 230 Volt (v)
  • Modular Clean Room
  • As Per Specific Requirement
  • TISSUE CULTURE , PHARMA COMPANY , LABORATIRIES , FOOD COMPANY , ENGINEERING COMPANY , MILK COMPANNY E.T.C
  • 230 V, 50Hz, Single Phase Volt (V)
  • As Per Specific Requirement
  • As Per Specific Size Requirement Kilograms (kg)
  • HEPA Filter
  • As Per Specific Requirement Millimeter (mm)
  • As Per Specific Requirement
    Product Description

    Pharmaceutical Clean Room is typically used for the scientific research, and manufacturing purposes. Basically, the clean room is the controlled environment, where the pollutants level is nominal. Generally, the clean room contains instruments and tools, which have the ability to remove the dust, aerosol particles, airborne microbes, and chemical vapors. The offered clean room is designed and manufactured by a team of dexterous professionals, who have incorporated top-notch assembling tools and pieces of equipment, for which, the extended durability and exceptional performance of the Pharmaceutical Clean Room are guaranteed. 


    A micron (or micrometer) is a millionth of a meter. A human hair is around 100 microns thick. Particles less than 50 microns cannot be seen by a naked eye. Bacteria measure 1 or 2 microns.


    HEPA filters

    HEPA stands for High-efficiency particulate air. HEPA filters are one of the most important elements of a cleanroom. They consist of a large, box shaped filter that removes airborne particles of specific sizes very efficiently. They must also be monitored and tested regularly to make sure they are still integral.


    HEPA filters are composed of a mat of randomly arranged fibers, which are typically composed of fiberglass with diameters between 0.5 and 2.0 microns. Key factors affecting function are fiber diameter, filter thickness, and filter face velocity.


    Dispersed oil particle (DOP) testing / Integrity Testing

    DOP testing or integrity testing is a testing procedure to ensure that a HEPA filter meets its efficiency specification and is properly seated and sealed in its frame.


    Airlock

    An airlock is a room where personnel, materials or equipment are transferred into or out of a cleaner environment. It can be the size of a small “cupboard€, or a large room where personnel change into and out of cleanroom garments, or where a forklift can enter.


    Clean room classification – ISO Class

    This refers to the level of cleanroom particulate cleanliness based on a number of airborne particles of a certain size per cubic meter. ISO 8 is the starting cleanroom level. A sterile cleanroom for the pharmaceutical industry will need to achieve ISO 5. Classes better than ISO 5, that is ISO 4 are generally only required for the electronics industry.


    Clean room classification – Annex 1 or ISO?

    Grades A through to D refer to cleanroom cleanliness for sterile products only, these Grades can be related to the ISO Classes, but they are not the same.


    The classification of 100, 10,000, and 100,000 normally refers to the withdrawn FED-STD-209 E Airborne Particulate Cleanliness Classes in Cleanrooms and Clean zones which was cancelled on November 29, 2001 by the U.S. General Services Administration (GSA).


    This was superseded by International Standard ISO 14644, Cleanrooms and controlled environments-Part 1: Classification of air cleanliness, and Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1.


    Room recovery rate

    The time it takes from a contamination event to the room regaining its designed cleanliness level as per the GMP requirements.


    Particle count

    A test that samples a fixed volume of air and captures, filters and counts airborne particles by their size. This is performed when the cleanroom is “at rest€ or “in operation€. For pharmaceutical operations, both airborne viable (alive) and non-viable (not alive) particle counts are performed. This is performed as part of the certification of a cleanroom and during regular environmental monitoring.

    Trade Information
    • Ahmedabad
    • Cheque
    • 10000/SQ .METER Per Month
    • 3-4 Week Week
    • Yes
    • If order is confirmed we will reimburse the sample cost
    • As per Standard Requirement
    • Africa, Middle East, Asia
    • All India
    • As Per Specific Requirement
      Contact Us

      69/70, Axar Industrial Park, B/h Amba Estate, Vinzol Patiya,Vatwa GIDC, Near Hathijan Circle , Ahmedabad, Gujarat, 382445, India
      Phone :+918045479501